Menu
Your Cart

Ombrello Hydrophobic Nano Coating for Car Glass

Ombrello hydrophobic nano coating for car windscreen protection
New
Ombrello Hydrophobic Nano Coating for Car Glass
15.99€
  • Stock: In Stock
  • Model: N-4001
  • SKU: N-4001

Ombrello Hydrophobic Nano Coating is an advanced glass treatment that creates an ultra-thin, transparent layer and makes water and dirt much less likely to adhere to the glass surface. When driving in rain or snow, water droplets form beads and slide off the glass, so you see the road earlier and more clearly and your reaction time is shorter.

The coating is designed primarily for car windscreens and other vehicle windows, but it can also be used on other smooth glass surfaces such as mirrors, glass roofs or shower glass panels.

Advantages:

  • Improves visibility in rain, snow and at night.
  • Water droplets and road film slide off the glass more easily – the view stays clearer for longer.
  • Helps to reduce wiper blade wear and washer fluid consumption.
  • Chemical-resistant and durable – the effect lasts for up to 12 months or around 20,000 km (depending on driving conditions and maintenance).
  • Makes it easier to remove ice, snow and dirt in winter – contaminants stick less to the treated glass.
  • Fast application – the windscreen can be treated in just a few minutes and the car can be used immediately after the process.

Application:

  1. Wash the glass with a suitable cleaner and thoroughly remove all grease, insects and other contamination.
  2. Dry the glass completely – the surface must be perfectly clean and dry.
  3. Hold the Ombrello ampoule above the glass and bend the “wings” to activate it. After 20–30 seconds start applying the coating with the felt side onto the glass. Use the whole ampoule within approximately 15 minutes.
  4. Spread the coating evenly over the entire area to be treated, leaving about 1 cm from the glass edges.
  5. After a few minutes, polish the glass with a clean paper towel or microfiber cloth until the surface looks clear again with no visible streaks. In low temperatures you can switch on windscreen heating to make the process easier.

Note: for best results, apply the nano coating only to a well-prepared, clean and dry glass surface. Avoid painted panels, plastic trims and wiper blades – Ombrello is designed exclusively for glass.